TOTALLY RESTORE
Totally Restore is our premium grouting formula, specifically designed to restore floors by filling concrete pores and pin holes. Using Totally Restore means your floor will be significantly tighter and protected from stains. Watch this video!
|
Application
It is very important to wet the whole floor area with water before you apply the Totally Restore grout. Take a look at the difference between prepping with and without water.
The WORX+ E-Sprayer is the best tool to apply both the water and grout with maximum efficiency. Once the water is down, apply the Totally Restore much like you did the water, in consistent, even lines. It’s the best time to start grinding on the Totally Restore grout when it goes blue and sticky. At this point it has taken in all the moisture and lined all the concrete’s pores
Don’t be concerned if the Totally Restore starts to dry up, you can reactivate by spraying on some water.
|
 |
Using Totally Restore will get you a closed and tighter slab ready for the next stage.
So, get yourself some Totally Restore and see just how good it is.
GROUT ME SOME TOTALLY RESTORE
You can watch our WORX+ Totally Restore product tutorial here.
If you have any questions, give our friendly team a call on 1300 897 873. Your confidence on the floor is our priority.