BOOST POTASSIUM
This is our mid-stage densifier, and it’s designed to be used after the floor has been grouted with Totally Restore. It can also be applied before honing to harden the concrete surface and create consistent colour.

Application
Spray your Boost Potassium over the floor until it can no longer absorb any more (the point of rejection). You can increase the efficiency of this process with the WORX+ E-Sprayer.

Curing
Curing time is measured after the Boost Potassium dries.

• New concrete needs at least one hour to cure.
• Older or damaged concrete may need to cure overnight.

After this first application, Boost Potassium can be applied less liberally prior to consecutive honing resins. This will ensure maximum hardening of the surface and a uniform colour in the final product.

BOOST LITHIUM
This is our final-stage densifier and is usually applied between the honing and polishing phases.

Application
Boost Lithium is applied by sprayer and spread with a microfiber mop. It can be polished as soon as it is dry to the touch.

Benefits

• Increased surface integrity and density.
• A more reflective finish.
• Corrected colour.
• High clarity.